Upload code by radio

you need to configure the radios unless you get the kit from us.

here are the instructions to configure the xbee radios:

put one xbbe radio on the refarm on the sofa board, remove the shunt and connect to your computer.

you will upload the configurations to the different xbee radios

• configure the xbee that goes on the refarm on vacations board

- open this file (end_device) in X-CTU software

- confirm the firmware to the lastest and pulse write.

• configure the xbee that goes on the sofa board

- open this file (coordinator_auto_reset) in X-CTU software

- confirm the firmware to the lastest and pulse write